Pacseal Hydraulics, Inc.

2.5 Gallon Hydraulic Bladder Accumulators

Main Content for 2.5 Gallon Accumulator

 

 

2.5-Gallon Accumulator Parts Table

Part Number Model Number Rated Pressure Shell Style Port Size Port Type
40-1583 ACC2.5-S3B1NS1 3000 psi Bottom Load 1-1/4" NPT
40-1583-CW ACC2.5-S3B1NC1 3000 psi Bottom Load 1-1/4" NPT
40-1732 ACC2.5-S3B3NS1 3000 psi Bottom Load 2" NPT
40-1732-CW ACC2.5-S3B3NC1 3000 psi Bottom Load 2" NPT
40-2079 ACC2.5-S3B2SS1 3000 psi Bottom Load 1-1/2" SAE
40-2079-CW ACC2.5-S3B2SC1 3000 psi Bottom Load 1-1/2" SAE
40-1736 ACC2.5-S3T1NS1 3000 psi Top Repairable 1-1/4" NPT
40-1736-CW ACC2.5-S3T1NC1 3000 psi Top Repairable 1-1/4" NPT
40-1741 ACC2.5-S3T3NS1 3000 psi Top Repairable 2" NPT
40-1741-CW ACC2.5-S3T3NC1 3000 psi Top Repairable 2" NPT
40-2080 ACC2.5-S5B1NS1 5000 psi Bottom Load 1-1/4" NPT
40-2080-CW ACC2.5-S5B1NC1 5000 psi Bottom Load 1-1/4" NPT
40-2017 ACC2.5-H3B1NS1 3000 psi Bottom Load 1-1/4" NPT
40-2017-CW ACC2.5-H3B1NC1 3000 psi Bottom Load 1-1/4" NPT
40-2018 ACC2.5-H3B3NS1 3000 psi Bottom Load 2" NPT
40-2018-CW ACC2.5-H3B3NC1 3000 psi Bottom Load 2" NPT
40-1631 Bladder Kit Standard      
40-1631-CW Bladder Kit Cold Weather      
40-1976 Bladder Kit Hi-Cycle      
40-1976-CW Bladder Kit Hi-Cycle, Cold Weather      
40-1789 Seal Kit, Port Assembly        
40-1985 Gas Valve Assembly, Bladder 3000 psi      
40-1225 Gas Valve Assembly, Bladder 5000 psi      
40-0495 Anti-Extrusion Ring        

SPECIFICATIONS:

COATING
  STANDARD Black Primer exterior, Oil interior 
  EPOXY PAINT Epoxy Coat Exterior
  PHENOLIC Interior coating, shell only
  WATER SERVICE Phenolic interior, stainless shell fluid port and anti-extrusion ring

 

SERVICE
  STANDARD  0 to 180° F (-18 to 82° C)  
  COLD WEATHER -30 to 180° F (-34 to 82° C)
  LOW TEMP -50 to 180° F (-46 to 82° C)

 

RATED PRESSURE
  3000 & 5000 psi ASME Boiler & Pressure Vessel Code Section VIII, Division 1
  6000 psi ASME Boiler & Pressure Vessel Code Section VIII, Division 1, Appendix 22

 

SPECIAL CONFIGURATIONS
  Noted by "X" at end of Model Number, defined by Part Number and Assembly Drawing